The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
E1644AC63.A is 1.64 inch oled display screen with All viewing angle screen. It is QSPI interface and resolution is 280*456.Driver IC is ICNA3311 and TP IC is ZT2717.Outline dimension is 23.74 x 38.62 mm, thickness is 0.78mm. Active area is 21.84*35.568mm. This lcd display is coming out with 30 pins definition. Operating Temperature is -20~70℃, Storage Temperature is -40~80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | E1644AC63.A |
| Size | 1.64 inch |
| LCM Outline Dimension(mm) | 23.74(V) x 38.62(W) x 0.78 |
| Active area | 21.84*35.568 |
| Number of Pixel(pixels) | 280(W) x RGB x 456(H) |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -40~ 80℃ |
| LCD Driver IC | ICNA3311 |
| TP IC | ZT2717 |
| Color | 16.7M |
| Display mode | Active Matrix |
| Interface | QSPI |
| Pixel arrangement | Real RGB arrangement |
| Pixel pitch | 78*78μm |
| Pins Description | |||
|---|---|---|---|
| Pin No. | Symbol | I/O | Function Description |
| 1 | NFC_TX1 | I/O | NFC TX1 |
| 2 | NFC_TX2 | I/O | NFC TX2 |
| 3 | GND | Power | Ground |
| 4 | ALS_VDD_1V8 | Power | ALS Analog Power Supply |
| 5 | VDDIO | Power | 1.8V power for OLED DDIC |
| 6 | GND | Power | Ground |
| 7 | QSPI_SI3 | I | OLED QSPI interface |
| 8 | QSPI_SI2 | I | OLED QSPI interface |
| 9 | QSPI CSX | I | OLED QSPI interface |
| 10 | QSPI_SCL | I | OLED QSPI interface |
| 11 | QSPI_SI1 | I | OLED QSPI interface |
| 12 | QSPI_SIO | I | OLED QSPI interface |
| 13 | GND | Power | Ground |
| 14 | REST | I | OLED Device reset signal(0:enable;1:Disable) |
| 15 | TE | O | Synchronous signal output from panel to avoid tearing effect |
| 16 | TP_RST | I/O | TP Reset, Active Low. |
| 17 | TP_VDD_2V8 | Power | 2.8V power Supply for TP |
| 18 | TP_INT | I/O | TP Interrupt to Host |
| 19 | TP_I2C_SCL | I | TP I2C CLK |
| 20 | TP_I2C_SDA | I/O | TP I2C Data |
| 21 | TP_VDD_1V8 | Power | 1.8V power Supply for TP |
| 22 | GND | Power | Ground |
| 23 | MTP_PWR | Power | Power Supply for OTP,Leave the pin open when not in use. |
| 24 | VCI_EN | I | OLED VCI Enable signal |
| 25 | VBAT | Power | Power Supply for PMIC |
| 26 | VBAT | Power | Power Supply for PMIC |
| 27 | VBAT | Power | Power Supply for PMIC |
| 28 | ALS_INT | I/O | ALS Interrupt to Host |
| 29 | ALS_SCL | I | ALS 12C CLK |
| 30 | ALS_SDA | I/O | ALS 12C Data |
