W310WVC001-A is a color active matrix LCD module incorporating amorphous silicon TFT(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, FPC, and a backlight unit. The 3.1′′ display area contains 480(RGB) x 800 pixels and can display up to 262K colors.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W310WVC001-A |
| Display Mode | Normally Blackjransmissive |
| Display Technology | a-Si TFT active matrix |
| Outline Dimension | 43.48(H) X 74.72(V) X 2・14(T) |
| Active Area | 40.32 (H) X 67.20 (V) |
| Resolutio n | 480 X(RGB)X800 |
| Pixel Pitch | 0.084(H) n 0.084( V) |
| Backlight | White LED |
| Luminance | 280 (Typ.) |
| Driver IC | ST7701S |
| Viewing Direction | FREE o'dock |
| Interface | SPI+RGB |
| Module lifetime(Hours) | 50000 |
| Interface NO. | Symbol | I/O or connect to | Description |
|---|---|---|---|
| 1-5 | NC | - | No connect. |
| 6-7 | GND | PWR SUPPLY | GROUND. |
| 8 | VCC | PWR SUPPLY | Power supply for anabg and booster circuits, 2・3V~3.3V・ |
| 9 | VSYNC | I/O | Vertical synchronizing input signal for RGB interface operation・ |
| 10 | HSYNC | I/O | Horizontal synchronizing input signal for RGB interface operation・ |
| 11 | DOTCLK | I/O | R.G.B Data bus. |
| 12 | DE | I/O | Data enable signal for RGB interface operation・ |
| 13-18 | B0-B5 | I/O | Data bus. |
| 19-24 | G0-G5 | I/O | Data bus. |
| 25-30 | R0-R5 | I/O | Data bus. |
| 31 | RESET | I/O | Reset signal. |
| 32 | CS | I/O | Chip selection pin. Low・active |
| 33 | SCL | I/O | SPI serial dock signal. |
| 34 | SDI | I/O | SPI data input/output pin. |
| 35 | IOVCC | PWR SUPPLY | Power supply for I/O system, 1・65V~3・3V・ |
| 36 | TE | - | Frame synchronization output signal |
| 37 | LEDK | LED DRIVER | Backlight cathode. |
| 38 | LEDA | LED DRIVER | Backlight anode. |
| 39 | GND | PWR SUPPLY | GROUND. |
| 40 | GND | PWR SUPPLY | GROUND. |
