W200QVC016-A is 2.0 inch ips all viewing angle tft lcd display screen with MCU interface.Customization is available.The shape is vertical with resolution 240*320. Outline dimension is 34.60×47.80mm, thickness is 1.90mm. Active area is 30.6×40.8mm. This lcd display is coming out with 30 pins defination. LCD driver IC is ST7789V2, operating voltage is 2.5V~3.3V. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | W200QVC016-A |
LCM Outline Dimension(mm) | 34.60(H) X 47.80(V) X 1.90(T) |
Active Area(mm) | 30.6 (H) X 40.8 (V) |
Number of Pixel(pixels) | 240X(RGB)X320 |
Touch panel | without |
Operating temperature(°C) | -20 ~ +70℃ |
Storage temperature(°C) | -30 ~ +80℃ |
Driver IC | ST7789V2 |
Brightness | 250nits |
Pixel arrangement | RGB stripe |
Display mode | Normally Black,Transmissive |
Interface | MCU |
Viewing Direction | All |
Backlight | White LED |
Module lifetime(Hours) | 50000 |
Pins Description | ||||
---|---|---|---|---|
PIN NO. | Symbol | I/O or connect to | Description | When not in use |
1-8 | D15-D8 | I/O | Data bus. | GND/IOVCC |
9 | GND | PWR SUPPLY | POWER GROUND. | - |
10-17 | D7-D0 | I/O | Data bus. | GND/IOVCC |
18 | IOVCC | PWR SUPPLY | Analog power supply, 1.65V~3.3V. | - |
19 | VCC | PWR SUPPLY | Analog power supply, 2.5V~3.3V. | - |
20 | RDX | I/O | Read signal in parallel interface. | GND/IOVCC |
21 | WRX | I/O | Write signal in parallel interface. | GND/IOVCC |
22 | RS | I/O | Display data/command selection pin in parallel interface. | GND/IOVCC |
23 | CSX | I/O | Chip select signal. | GND/IOVCC |
24 | RESET | I/O | Reset pin. | - |
25 | IM0 | I/O | The MCU interface 8bits & 16bits mode select. | - |
26 | GND | PWR SUPPLY | POWER GROUND. | - |
27 | LEDA | LED DRIVER | Backlight anode. | - |
28 | LEDK1 | LED DRIVER | Backlight cathode. | - |
29 | LEDK2 | LED DRIVER | Backlight cathode. | |
30 | LEDK3 | LED DRIVER | Backlight cathode. |