W350HVC016-A-CT is 3.5 inch tft lcd display module with SPI&RGB interface and IPS All o’clock viewing angle screen. Customization is available. The shape is a rectangle with resolution 320*480. Outline dimension is 56.56 X 90.25mm, thickness is 4.0 mm. Active area is 48.96 X 73.44 mm. This lcd display is coming out with 40 pins definition. Working temperature is -20 to +70℃, storage temperature is -30 to +80℃.Non-touch is available.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W350HVC016-A-CT |
| LCM Outline Dimension(mm) | 56.56(H) X 90.25(V) X 4.0(T) |
| Active Area(mm) | 48.96 (H) X 73.44 (V) |
| Number of Pixel(pixels) | 320X(RGB)X480 |
| Touch panel | With |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Interface | SPI+RGB |
| Driver IC | ST7796U |
| Display Mode | Normally Black, Transmissive |
| Backlight | White LED |
| Viewing Direction | All o'clock |
| Pixel Configuration | RGB Stripe |
| Pins Description | ||||
|---|---|---|---|---|
| PIN NO. | Symbol | I/O or connect to | Description | When not in use |
| 1 | GND | PWR SUPPLY | GROUND. | - |
| 2 | VCI | PWR SUPPLY | Power supply for analog and booster circuits,2.3V~3.3V. | - |
| 3 | GND | PWR SUPPLY | GROUND. | - |
| 4 | IOVCC | PWR SUPPLY | Power supply for I/O system,1.65V~3.3V. | - |
| 5 | CS | I/O | Chip selection pin.Low-active. | GND/IOVCC |
| 6 | RS | I/O | Display data/command selection (RS) pin in MCU interface. | GND/IOVCC |
| 7 | WRX(SCL) | I/O | Write signal. | GND/IOVCC |
| 8 | RD | I/O | Read signal. | GND/IOVCC |
| 9 | SDA | I | SPI interface input pin. | GND/IOVCC |
| 10 | SDO | O | SPI interface output pin. | - |
| 11-28 | D10-D17 | I/O | R.G.B Data bus. | GND/IOVCC |
| 29 | DE | I/O | Data enable signal for RGB interface operation. | GND/IOVCC |
| 30 | DCLK | I/O | Dot clock signal for RGB interface operation. | GND/IOVCC |
| 31 | HSYNC | I/O | Horizontal synchronizing input signal for RGB interface operation. | GND/IOVCC |
| 32 | VSYNC | I/O | Vertical synchronizing input signal for RGB interface operation. | GND/IOVCC |
| 33 | RESET | I/O | Reset pin. | - |
| 34 | IM2 | I/O | The interface mode select. | GND/IOVCC |
| 35 | IM1 | I/O | The interface mode select. | GND/IOVCC |
| 36 | IMO | I/O | The interface mode select. | GND/IOVCC |
| 37 | NC | - | No connect. | - |
| 38 | NC | - | No connect. | - |
| 39 | LEDA | LED DRIVER | Backlight anode. | - |
| 40 | LEDK | LED DRIVER | Backlight cathode. | - |
