FLS-WTY109QM078 is 1.09 inch IPS All o’clock viewing angle tft lcd display screen with SPI interface. The shape is a circular with resolution 240*240. Outline dimension is 30.59 X 32.98mm, thickness is 1.56mm. Active area is 27.79 X 27.79mm. Driver IC is GC9A01.Working temperature is -10 to +60℃, storage temperature is -20 to +70℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | FLS-WTY109QM078 |
| LCD type | 1.09 inch LTPS |
| LCM Outline Dimension(mm) | 30.59(W) X 32.98(H) X 1.56(T) |
| Active Area(mm) | 27.79H) X27.79(V) |
| Number of Pixel(pixels) | 240(RGB)*240 |
| Touch panel | without |
| Operating temperature(°C) | -10 ~ 60℃ |
| Storage temperature(°C) | -20 ~ 70℃ |
| Driver IC | GC9A01 |
| Brightness | TBD |
| Color filter array | RGB stripe |
| Display mode | Normally black |
| Interface | 4SPI 1lane |
| Viewing Direction | ALL o'clock |
| Backlight | White LED |
| Pins Description | ||
|---|---|---|
| PIN NO. | Symbol | Description |
| 1 | VSS | Ground |
| 2 | NC | NC |
| 3 | RES | Hardware Reset input pin |
| 4 | NC | NC |
| 5 | CS | MPU/SPI IF Chip select input pin. Low enable. High disable |
| 6 | DCX/SCL | This pin is used serial interface clock in 3-wire 9-bit / 4-wire 8-bit serial |
| 7 | NC | NC |
| 8 | VDDIO | Low voltage power supply for interface logic circuits(1.65~3.3V) |
| 9 | VDD | High voltage power supply for analog circuit blocks(2.5~3.3V) |
| 10 | NC | NC |
| 11 | LEDK | Backlight - |
| 12 | LEDA | Backlight + |
| 13 | TE | Tearing effect signal is used to synchronize MCU toframe |
| 14-21 | NC | NC |
| 22 | SDA | Serial in/out signal in 3-wire 9-bit/4-wire 8-bit serial |
| 23 | NC | NC |
| 24 | WR/A0 | When using MPU/4-line SPI IF, this pin is used to Data/command selection pin. |
