The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
W430WQC017-A-CT is 4.3 inch tft lcd display module with RGB 24Bits interface, ips all viewing angle screen and touch panel. Customization is available. The shape is a rectangle with resolution 480*272. Outline dimension is 105.4 X 67.1mm, thickness is 4.22mm. Active area is 95.04 X 53.86 mm. This lcd display is coming out with 40 pins definition. LCD driver IC is ST7283. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃. Non-Touch is optional.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W430WQC017-A-CT |
| Outline Dimension(mm) | 105.4(H) X 67.1(V) X 4.22(T) |
| Active Area(mm) | 95.04 (H) X 53.86 (V) |
| Number of Pixel(pixels) | 480X(RGB)X272 |
| Touch panel | with |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Driver IC | ST7283 |
| TP IC | FT5316 |
| Brightness | 300nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally Black,Transmissive |
| Interface | RGB 24bits |
| Viewing Direction | All o'clock |
| Backlight | White LED*7 |
| Module lifetime(Hours) | 50000 |
| Pins Description | ||||
|---|---|---|---|---|
| PIN NO. | Symbol | I/O or connect to | Description | When not in use |
| 1 | LEDK | LED DRIVER | Backlight cathode | - |
| 2 | LEDA | LED DRIVER | Backlight anode | - |
| 3 | GND | PWR SUPPLY | Power Ground | - |
| 4 | VCC | PWR SUPPLY | Power supply for digital circuit. | - |
| 5-12 | R0-R7 | I/O | Red signal data bus. | GND/IOVCC |
| 13-20 | G0-G7 | I/O | Green signal data bus. | GND/IOVCC |
| 21-28 | B0-B7 | I/O | Blue signal data bus. | GND/IOVCC |
| 29 | GND | PWR SUPPLY | Power ground. | - |
| 30 | PCLK | I/O | Dot clock signal. | - |
| 31 | DISP | I/O | Display control / standby mode selection. | GND/IOVCC |
| 32 | HSYNC I | I/O | Horizontal sync input. | GND/IOVCC |
| 33 | VSYNC | I/O | Vertical sync input. | GND/IOVCC |
| 34 | DE | I/O | Data enable signal. | GND/IOVCC |
| 35 | HDIR | - | Horizontal scan direction control pin. This pin must be connected to“H”or“L”according to system application. | GND/IOVCC |
| 36 | GND | PWR SUPPLY | Power ground. | - |
| 37 | XR | - | TP left signal. | - |
| 38 | YD | - | TP down signal. | - |
| 39 | XL | - | TP right signal. | - |
| 40 | YU | - | TP up signal. | - |
