The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
W200QVC016-A is 2.0 inch ips all viewing angle tft lcd display screen with MCU interface.Customization is available.The shape is vertical with resolution 240*320. Outline dimension is 34.60×47.80mm, thickness is 1.90mm. Active area is 30.6×40.8mm. This lcd display is coming out with 30 pins defination. LCD driver IC is ST7789V2, operating voltage is 2.5V~3.3V. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W200QVC016-A |
| LCM Outline Dimension(mm) | 34.60(H) X 47.80(V) X 1.90(T) |
| Active Area(mm) | 30.6 (H) X 40.8 (V) |
| Number of Pixel(pixels) | 240X(RGB)X320 |
| Touch panel | without |
| Operating temperature(°C) | -20 ~ +70℃ |
| Storage temperature(°C) | -30 ~ +80℃ |
| Driver IC | ST7789V2 |
| Brightness | 250nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally Black,Transmissive |
| Interface | MCU |
| Viewing Direction | All |
| Backlight | White LED |
| Module lifetime(Hours) | 50000 |
| Pins Description | ||||
|---|---|---|---|---|
| PIN NO. | Symbol | I/O or connect to | Description | When not in use |
| 1-8 | D15-D8 | I/O | Data bus. | GND/IOVCC |
| 9 | GND | PWR SUPPLY | POWER GROUND. | - |
| 10-17 | D7-D0 | I/O | Data bus. | GND/IOVCC |
| 18 | IOVCC | PWR SUPPLY | Analog power supply, 1.65V~3.3V. | - |
| 19 | VCC | PWR SUPPLY | Analog power supply, 2.5V~3.3V. | - |
| 20 | RDX | I/O | Read signal in parallel interface. | GND/IOVCC |
| 21 | WRX | I/O | Write signal in parallel interface. | GND/IOVCC |
| 22 | RS | I/O | Display data/command selection pin in parallel interface. | GND/IOVCC |
| 23 | CSX | I/O | Chip select signal. | GND/IOVCC |
| 24 | RESET | I/O | Reset pin. | - |
| 25 | IM0 | I/O | The MCU interface 8bits & 16bits mode select. | - |
| 26 | GND | PWR SUPPLY | POWER GROUND. | - |
| 27 | LEDA | LED DRIVER | Backlight anode. | - |
| 28 | LEDK1 | LED DRIVER | Backlight cathode. | - |
| 29 | LEDK2 | LED DRIVER | Backlight cathode. | |
| 30 | LEDK3 | LED DRIVER | Backlight cathode. |
