W114QVH001-A is 1.14 inch tft lcd display with SPI interface and IPS all viewing angle screen. Customization is available. The shape is a rectangle with resolution 135*240. Outline dimension is 17.60 x 31.00mm, thickness is 1.59mm. Active area is 14.86 x 24.91 mm. This lcd display is coming out with 13 pins interface. LCD driver IC is ST7789V2. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W114QVH001-A |
| Outline Dimension(mm) | 17.60(H) x 31.00(V) x 1.59(T) |
| Active Area(mm) | 14.86 (H) x 24.91 (V) |
| Number of Pixel(pixels) | 135 x(RGB)x 240 |
| Touch panel | optional |
| Operating temperature(°C) | -20 ~ +70℃ |
| Storage temperature(°C) | -30 ~ +80℃ |
| Driver IC | ST7789V2 |
| Brightness | 250nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally Black, Transmissive |
| Interface | SPI 4 Lane |
| Viewing Direction | All o'clock |
| Backlight | White LED |
| Display Technology | α-Si TFT active matrix |
| Pins Description | ||
|---|---|---|
| PIN NO. | Symbol | Description |
| 1-2 | NC | NC |
| 3 | SDA | SPI interface input/output pin. |
| 4 | SCL | This pin is used to be serial interface clock. |
| 5 | RS | Display data/command selection pin in 4-line serial interface. |
| 6 | RES | This signal will reset the device and it must be applied to properly initialize the chip. |
| 7 | CS | Chip select signal. |
| 8 | GND | POWER GROUND. |
| 9 | NC | NC |
| 10 | VCC | Analog power supply, 2.8V~3.2V |
| 11 | LEDK | Backlight cathode. |
| 12 | LEDA | Backlight anode. |
| 13 | GND | POWER GROUND. |
