H120BLX01.0 is 1.2 inch oled display screen with MIPI interface. Customization is available. The shape is a round with resolution 390*390. Outline dimension is 33.95 × 33.62mm, thickness is 0.607 mm. Active area is 30.42 × 30.42 mm. This oled display is coming out with 30 pins definition. Driver IC is WT010 , Working temperature is -20 to +60℃, storage temperature is -30 to +70℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | H120BLX01.0 |
| Size | 1.2 inch |
| LCM Outline Dimension(mm) | 33.95(H) × 33.62(V) × 0.607(T) |
| Active area | 30.42(H)×30.42(V) |
| Number of Pixel(pixels) | 390 x 390 |
| Touch panel | Optional |
| Operating temperature(°C) | -20 ~ 60℃ |
| Storage temperature(°C) | -30~ 70℃ |
| LCD Driver IC | WT010 |
| Color | 16.7M |
| Display mode | Active Matrix |
| Interface | MIPI |
| Color Configuration | Hyper R.G.B |
| Frame rate (normal mode) | 45 (Hz) |
| Pins Description | |||
|---|---|---|---|
| PIN NO. | Symbol | I/O | Description |
| 1 | VDDIO | power | Power supply for interface system except MIPI interface |
| 2 | VDDIO | power | Power supply for interface system except MIPI interface |
| 3 | VCI | power | Driver analog power supply (Power IC need to follow AUO’s suggestion) |
| 4 | VCI | power | Driver analog power supply (Power IC need to follow AUO’s suggestion) |
| 5 | SWIRE | O | SWIRE signal for PWR IC control |
| 6 | CSX | I | SPI Enable Signal |
| 7 | SCL | I | SPI Clock signal |
| 8 | DCX | I | SPI CMD/Data selection signal |
| 9 | SDI | I/O | SPI data signal |
| 10 | SDO | O | SPI Output signal |
| 11 | TE | O | Vsync(vertical sync) signal output from panel to avoid tearing effect |
| 12 | NC | - | Floating |
| 13 | ELVSS | Power | AMOLED negative power supply (Power IC need to follow AUO's suggestion) |
| 14 | ELVSS | Power | AMOLED negative power supply (Power IC need to follow AUO's suggestion) |
| 15 | ELVSS | Power | AMOLED negative power supply (Power IC need to follow AUO's suggestion) |
| 16 | ELVDD | Power | AMOLED positive power supply (Power IC need to follow AUO's suggestion) |
| 17 | ELVDD | Power | AMOLED positive power supply (Power IC need to follow AUO's suggestion) |
| 18 | ELVDD | Power | AMOLED positive power supply (Power IC need to follow AUO's suggestion) |
| 19 | GND | Power | Ground |
| 20 | DSI_D0P | I/O | MIPI positive data signal |
| 21 | DSI_D0N | I/O | MIPI negative data signal |
| 22 | GND | Power | Ground |
| 23 | DSI_CLKP | I | MIPI positive data signal |
| 24 | DSI_CLKN | I | MIPI negative data signal |
| 25 | GND | Power | Ground |
| 26 | RESX | I | Device reset signal (0 : enable ;1 : Disable) |
| 27 | TP_RES | I | TP Reset signal |
| 28 | TP_SCL | I | TP Clock signal |
| 29 | TP_SDA | I | TP Data signal |
| 30 | TP_INT | I | TP initial signal |
