W130QVC004-A is 1.3 inch tft lcd display module with SPI&MCU interface and ips all viewing angle screen. Customization is available. The shape is a square with resolution 240*240. Outline dimension is 26.20 X 29.22mm, thickness is 1.45mm. Active area is 23.4 X 23.4 mm. This lcd display is coming out with 24 pins definition. LCD driver IC is ST7789V2. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃. Touch panel is optional.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | W130QVC004-A |
Outline Dimension(mm) | 26.20(H) X 29.22(V) X 1.45(T) |
Active Area(mm) | 23.4 (H) X 23.4 (V) |
Number of Pixel(pixels) | 240X(RGB)X240 |
Touch panel | optional |
Operating temperature(°C) | -20 ~ +70℃ |
Storage temperature(°C) | -30 ~ +80℃ |
Driver IC | ST7789V2 |
Brightness | 300 nits |
Pixel arrangement | RGB stripe |
Display mode | Normally Black, Transmissive |
Interface | SPI&MCU |
Viewing Direction | All o'clock |
Backlight | White LED |
Surface Treatment | Anti-Glare |
Pins Description | ||||
---|---|---|---|---|
PIN NO. | Symbol | I/O or connect to | Description | When not in use |
1 | LEDA | LED DRIVER | Backlight anode | - |
2 | LEDK | LED DRIVER | Backlight cathode | - |
3 | GND | PWR SUPPLY | Power Ground | - |
4 | VDD2.8V | PWR SUPPLY | Analog power supply, 2.5V~3.3V. | - |
5 | VDDIO | PWR SUPPLY | Interface power supply,1.65V~3.3V. | - |
6 | IM1/IM2 | I/O | The MCU and SPI interface Select pin. | - |
7 | RESET | I/O | Reset pin. | - |
8 | CS | I/O | Chip select signal. | IOVCC/GND |
9 | D/CX | I/O | The data/command signal in MCU. The clock signal in serial. | IOVCC/GND |
10 | WR | I/O | Write signal in MCU. The data/command signal in SPI-4W. | IOVCC/GND |
11 | RD | I/O | Read signal in MCU. | IOVCC/GND |
12 | SDA | I/O | The data input/ output signal in serial. | IOVCC/GND |
13-20 | DB0-DB7 | I/O | Data bus. | IOVCC/GND |
21 | TE | I/O | Tearing effect signal. | - |
22 | NC | - | No connect. | - |
23-24 | GND | PWR SUPPLY | POWER GROUND. | - |