The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
W169QVN003-A-CT is 1.69 inch tft lcd display module with 4-Line SPI interface and ips all viewing angle screen. Customization is available. The shape is a rectangle with resolution 240*280. Outline dimension is 33.27 X 40.63mm, thickness is 3.35mm. Active area is 27.97 X 32.63 mm. This lcd display is coming out with 24 pins definition. LCD driver IC is ST7789V2. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃. Non-Touch is optional.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W169QVN003-A-CT |
| LCM Outline Dimension(mm) | 33.27(H) X 40.63(V) X 3.35(T) |
| Active Area(mm) | 27.97 (H) X 32.63 (V) |
| Number of Pixel(pixels) | 240 X(RGB)X 280 |
| Touch panel | with |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Interface | SPI 4line |
| Driver IC | ST7789V2 |
| Pixel Configuration | RGB Stripe |
| Backlight | White LED |
| Viewing Direction | All o'clock |
| Luminance | 300nits |
| Display Mode | Normally Black, Transmissive |
| Pins Description | ||
|---|---|---|
| PIN NO. | Symbol | Description |
| 1 | VDDIO | Analog power supply, 1.8V. |
| 2 | VDD | Analog power supply, 2.8~3.3V. |
| 3 | TE | Tearing effect signal is used to synchronize MCU to frame memory |
| 4 | SDA | SPI interface input pin |
| 5 | D/CX | Display data/command selection pin in 4-line serial interface. |
| 6 | SCL | This pin is used to be serial interface clock. |
| 7 | CS | Chip select signal |
| 8 | RESET | This signal will reset the device and it must be applied to properly |
| 9 | VDDIO | Analog power supply, 1.8V |
| 10 | VDD | Analog power supply, 2.8~3.3V |
| 11-12 | NC | NO connect |
| 13-14 | LEDK | Backlight cathode. |
| 15-16 | LEDA | Backlight anode. |
| 17 | TP-INT | Interrupt request to the host, 1.8V. |
| 18 | TP-SDA | TP data input and output , 1.8V. |
| 19 | TP-SCL | This pin is used to be serial interface clock. , 1.8V |
| 20 | TP-RES | This signal will reset the device and it must be applied to properly |
| 21-24 | GND | POWER GROUND. |
