The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
W231QVC001-A is 2.0 inch tft lcd display with SPI and RGB interface and TN 6 o’clock viewing angle screen. Customization is available. The shape is a rectangle with high resolution 320*240. Outline dimension is 55.2 X 47.55mm, thickness is 2.55mm. Active area is 46.75 X 35.06 mm. This lcd display is coming out with 40 pins interface. LCD driver IC is ILI9342C. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W231QVC001-A |
| LCM Outline Dimension(mm) | 55.2 (H) X 47.55(V) X 2.55(T) |
| Active Area(mm) | 46.75 (H) X 35.06 (V) |
| Number of Pixel(pixels) | 320X(RGB)X240 |
| Touch panel | without |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Interface | SPI+RGB |
| Driver IC | ILI9342C |
| Pixel Configuration | RGB Stripe |
| Backlight | White LED |
| Viewing Direction | 6 o'clock |
| Display Mode | Normally White,Transmissive |
| Pins Description | ||||
|---|---|---|---|---|
| PIN NO. | Symbol | I/O or connect to | Description | When not in use |
| 1 | C22A | - | Connect the charge-pumping capacitor. | - |
| 2 | C22B | - | Connect the charge-pumping capacitor. | - |
| 3 | C21A | - | Connect the charge-pumping capacitor. | - |
| 4 | C21B | - | Connect the charge-pumping capacitor. | - |
| 5 | C12A | - | Connect the charge-pumping capacitor. | - |
| 6 | C12B | - | Connect the charge-pumping capacitor. | - |
| 7 | C11A | - | Connect the charge-pumping capacitor. | - |
| 8 | C11B | - | Connect the charge-pumping capacitor. | - |
| 9 | CX11A | - | Connect the charge-pumping capacitor. | - |
| 10 | CX11B | - | Connect the charge-pumping capacitor. | - |
| 11 | DDVDH | - | Power supply for the source driver and VCOM driver. | - |
| 12 | VGL | PWR SUPPLY | Power supply for the gate driver. | - |
| 13 | VGH | PWR SUPPLY | Power supply for the gate driver. | - |
| 14 | VCL | - | Regulated Low voltage level for interface circuits. | - |
| 15 | GND | PWR SUPPLY | Power ground. | - |
| 16 | VCC | PWR SUPPLY | High voltage power supply for analog circuit. | - |
| 17 | RESET | I/O | Reset signal,active low. | - |
| 18 | NC | - | No connect. | - |
| 19 | GND | PWR SUPPLY | Power ground. | - |
| 20-25 | D0-D5 | I/O | RGB data bus. | GND/IOVCC |
| 26 | GND | PWR SUPPLY | Greed DATA bus. | - |
| 27 | CS | I/O | Chip select signal. | - |
| 28 | SCL | I/O | Serial interface clock. | GND/IOVCC |
| 29 | GND | PWR SUPPLY | Power ground. | GND/IOVCC |
| 30 | PCLK | I/O | Dot clock signal for RGB interface operation. | GND/IOVCC |
| 31 | HS | I/O | Line synchronizing signal for RGB interface operation. | GND/IOVCC |
| 32 | VS | I/O | Frame synchronizing signal for RGB interface operation. | GND/IOVCC |
| 33 | GND | PWR SUPPLY | Power ground. | - |
| 34 | VDDD | - | Regulated Low voltage level for interface circuits. | - |
| 35 | SDA | I/O | Serial data in/out signal. | GND/IOVCC |
| 36 | NC | - | No connect. | - |
| 37-38 | LEDK | LED DRIVER | Backlight cathode. | - |
| 39-40 | LEDA | LED DRIVER | Backlight anode. | - |
