The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
Ink Cubic-M026F is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The display is capable to display images at 1-bit black, white and red full display capabilities. The 13.3″ active area contains 960×680 pixels. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, SRAM, LUT, VCOM and border are supplied with each panel.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | MF-1D302-M026F |
| Place of Origin | Guangdong, China |
| Brand Name | Chance |
| Product Name | E Ink Display |
| Size | 13.3 Inch |
| Outline Dimension | 286.32(H)x212.26(V) x1.07(D) |
| Active Area | 275.52(H)x195.16(V) |
| Pixel Pitch | 0.287x0.287 |
| Resolution | 960*680 |
| Interface | SPI |
| Pixel Configuration | Recta ngle |
| Driver IC | SSD1677 |
| Display Color | Black White Red |
| Module lifetime(Hours) | 50000 |
| Pin | Single | Description | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connect with other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input lor the Control Loop | |
| 4 | NC | No connection and do noi connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | TSCL | Must NC or pull low | |
| 7 | TSDA | Must NC or pull low | |
| 8 | BSI | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busv state output pin | Note 6-4 |
| 10 | RES# | Reset signal inpul. | Note 6-3 |
| 11 | DC# | Data /Command control pin | Note 6-2 |
| 12 | CS# | The chip select input connecting io the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pin tor interiace. | |
| 14 15 | SDA VDDIO | Serial data pin for interiace. Power input pin lor the Interlace. | |
| 16 | VC1 | Power Supply pin for the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin tor Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source criving voltage | |
| 23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
