CHA-5D080X48D001 is 5.00 inch Transflective lcd display module with RGB interface and TN 6 o’clock viewing angle screen. Customization is available. The shape is a rectangle with resolution 800*480. Outline dimension is 120.7*75.9 mm, thickness is 2.95 mm. Active area is 108(H)*64.8(V) mm. This lcd display is coming out with 40 pins definition. Working temperature is -20 to +70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | CHA-5D080X48D001 |
| LCM Outline Dimension(mm) | 120.7*75.9*2.95 |
| Active Area(mm) | 108(H)*64.8(V) |
| Number of Pixel(pixels) | 800(RGB)*480 |
| Touch panel | Without |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Interface | RGB |
| Driver IC | HX8264+HX8664 |
| Display Mode | transflective /Normally White |
| Backlight | White LED |
| Viewing Direction | 6 o'clock |
| Pixel arrangement | RGB vertical stripe |
| Pins Description | |||
|---|---|---|---|
| PIN NO. | Symbol | Discription | I/O |
| 1 | VLED- | Cathode pin OF backlight | P |
| 2 | VLED+ | Anode pin of backlight | P |
| 3 | GND | Ground. | P |
| 4 | VDD | Supply voltage(3.3V). | P |
| 5 | R0 | Red data input. | I |
| 6 | R1 | Red data input. | I |
| 7 | R2 | Red data input. | I |
| 8 | R3 | Red data input. | I |
| 9 | R4 | Red data input. | I |
| 10 | R5 | Red data input. | I |
| 11 | R6 | Red data input. | I |
| 12 | R7 | Red data input. | I |
| 13 | G0 | Green data input. | I |
| 14 | G1 | Green data input. | I |
| 15 | G2 | Green data input. | I |
| 16 | G3 | Green data input. | I |
| 17 | G4 | Green data input. | I |
| 18 | G5 | Green data input. | I |
| 19 | G6 | Green data input. | I |
| 20 | G7 | Green data input. | I |
| 21 | B0 | Blue data input. | I |
| 22 | B1 | Blue data input. | I |
| 23 | B2 | Blue data input. | I |
| 24 | B3 | Blue data input. | I |
| 25 | B4 | Blue data input. | I |
| 26 | B5 | Blue data input. | I |
| 27 | B6 | Blue data input. | I |
| 28 | B7 | Blue data input. | I |
| 29 | GND | Ground. | P |
| 30 | PCLK | Clock signal. Latching data at the rising edge | I |
| 31 | DISP | Standby setting for testing, it should be connected to VDD in normal operation mode. If connected to GND, the IC is in standby mode. | I |
| 32 | HSYNC | Horizontal Sync input. Negative polarity. | I |
| 33 | VSYNC | Vertical Sync input. Negative polarity. | I |
| 34 | DE | Data input Enable. Active High to enable the data input Bus under “DE Mode” . | I |
| 35 | NC | -- | -- |
| 36 | GND | Ground. | P |
| 37 | XR(NC) | Touch panel Right Glass Terminal | A/D |
| 38 | YD(NC) | Touch panel Bottom Film Terminal | A/D |
| 39 | XL(NC) | Touch panel LIFT Glass Terminal | A/D |
| 40 | YU(NC) | Touch panel Top Film Terminal | A/D |
