Ink Cubic-M030F-I is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 3.97” active area contains 480×800 pixels, and has 2-bit B/W/R/Y full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, SRAM, LUT, VCOM and border are supplied with each panel.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | M030F-I |
| Place of Origin | Guangdong, China |
| Brand Name | Chance |
| Product Name | E Ink Display |
| Outline Dimension | 45.03(H)x91.75(V)x0.93(D) |
| Active Area | 38.18(H)x79.68(V) |
| Pixel Pitch | 0.207x0.207 |
| Resolution | 184*384 |
| Interface | 3-wire SPI/4-wire SPI |
| LCD Driver IC | JD79667 |
| Display Color | Black White Red Yellow |
| Operating Temperature | 0~40°C |
| Storage Temperature | -25~60°C |
| Module lifetime(Hours) | 50000 |
| Pin# | Single | Description | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connect wilh other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input for the Control Loop | |
| 4 | NC | No connection and do not connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | NC | No connection and do not connect with other NC pins | Keep Open |
| 7 | NC | No connection and do not connect with other NC pins | Keep Open |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busv state output pin | Note 6-4 |
| 10 | RES# | Reset signal input. | Note 6-3 |
| 11 | D/C# | Daia /Command control pin | Note 6-2 |
| 12 | CS# | The chip select input connecting to the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pn for interface. | |
| 14 | SDA | Serial data pm lor interface. | |
| 15 | VDDIO | Power input pin tor the Interlace. | |
| 16 | VCI | Power Supply pin tor the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
