The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
Ink Cubic -M010F is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 3.7”active area contains 240×416pixels, and has 1-bit B/W/R full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, SRAM, LUT, VCOM and border are supplied with each panel.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | MF-13702-M010F |
| Screen Size | 3.7 |
| Display Resolution | 240(H)x416(V) |
| Active Area | 47.04(H)x8l.54(V) |
| Pixel Pitch | 0.202x0.203 |
| Pixel Configuration | Rectangle |
| Outline Dimension | 53(H )x9199 (V)x0.91(D) |
| Weight | 8. 5±0. 5 |
| Module lifetime(Hours) | 50000 |
| Pin# | Single | Description | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connect with other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input tor the Control Loop | |
| 4 | NC | No connection and do not connect with other N C pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | NC | No connection and do not connect with other NC pins | Keep Open |
| 7 | NC | No connection and do not connect with other NC pins | Keep Open |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busy state output pin | Note 6-4 |
| 10 | RES# | Reset signal input. | Note 6-3 |
| 11 | D/C# | Daia /Command control pin | Note 6-2 |
| 12 | CS# | The chip select input connecting to the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pn lor inter face. | |
| 14 | SDA | Serial data pin lor interlace. | |
| 15 | VDDIO | Power inpul pin lor thelnleriace. | |
| 16 | VCI | Power Supply pin for the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply lor OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin tor Negative Gale driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
