W101WSC009-A-CTT is a color active matrix LCD module incorporating amorphous silicon TFT(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, FPC, and a backlight unit. The 10.1′′ display area contains 1024 (RGB) x 600 pixels and can display up to 262K colors. Fit in to the black panel touch screen.
DRAWING
SPECIFICATIONS
| Part No. | W101WSC009-A-CT |
| LCM Outline Dimension(mm) | 235.00(W)*143.00(H)*5.15(T) mm |
| Active Area(mm) | 222.72(W)*125.28(H) mm |
| Resolution | 1024*600 |
| Touch panel | with |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ +80℃ |
| Driver IC | HX8282A+HX8696A |
| Brightness | 280nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally black,Transmissive |
| Interface | TTL |
| Viewing Direction | 6 o'clock |
| Backlight | White LED |
| Module lifetime(Hours) | 50000 |
| Interface NO. | Symbol | I/O or connect to | Description | When not in use |
|---|---|---|---|---|
| 1 | GND | PWR SUPPLY | Power ground. | - |
| 2-3 | VDD | PWR SUPPLY | Voltage input pin for internal logic. 2.5V-3.3V. | - |
| 4-5 | LED+ | LED DRIVER | Backlight anode. | - |
| 6 | NC | - | No connect. | - |
| 7 | GND | PWR SUPPLY | Power ground. | - |
| 8-11 | R0-R3 | I/O | Red signal data bus. | GND/IOVCC |
| 12 | GND | PWR SUPPLY | Power ground. | - |
| 13-16 | R4-R7 | I/O | Red signal data bus. | GND/IOVCC |
| 17 | GND | PWR SUPPLY | Power ground. | - |
| 18-21 | G0-G3 | I/O | Green signal data bus. | GND/IOVCC |
| 22 | GND | PWR SUPPLY | Power ground. | - |
| 23-26 | G4-G7 | I/O | Green signal data bus. | GND/IOVCC |
| 27 | GND | I/O | Power ground. | - |
| 28-31 | B0-B3 | I/O | Blue signal data bus. | GND/IOVCC |
| 32 | GND | I/O | Power ground. | - |
| 33-36 | B4-B7 | I/O | Blue signal data bus. | GND/IOVCC |
| 37 | GND | I/O | Power ground. | - |
| 38 | HSYNC | I/O | Horizontal sync input. | GND/IOVCC |
| 39 | VSYNC | I/O | Vertical sync input. | GND/IOVCC |
| 40 | GND | I/O | Power ground. | - |
| 41 | DE | I/O | Data enable signal. | GND/IOVCC |
| 42 | GND | I/O | Power ground. | - |
| 43 | DCLK | I/O | Clock signal in serial. | GND/IOVCC |
| 44 | GND | I/O | Power ground. | - |
| 45 | NC/CS | I/O | No connect/ A chip select signal. | - |
| 46 | NC/SDA | I/O | No connect/ ”L”, this pin act as 3-wire “SDA” pin. | - |
| 47 | NC/SCL | I/O | No connect/ ”L”, this pin act as 3-wire “SCL” pin. | - |
| 48 | DISP | I/O | Standby mode control. “H”,normal operation. | GND/IOVCC |
| 49 | RESET | I/O | System Reset | - |
| 50 | GND | I/O | Power ground. | - |
