The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
TT126AMC10B is 12.6 inch oled display with full color wide viewing angle screen. It is MIPI interface and resolution is 1600*2560.Outline dimension is 295.11×193.33 mm, thickness is 2.43 mm. Active area is 271.4112×169.632 mm. This oled display is coming out with 70 pins definition. Operating Temperature is -20~70℃, Storage Temperature is -40~80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | TT126AMC10B |
| Outline Dimension(mm) | 295.11×193.33×2.43 |
| Active Area(mm) | 271.4112x169.632 |
| Number of Pixel(pixels) | 1600(W)xRGBx2560(H) |
| Operating temperature(°C) | -20 ~ +70℃ |
| Storage temperature(°C) | -40 ~ +80℃ |
| Display Mode | AMOLED |
| Brightness | 400nits |
| Interface | MIPI 4 Lane |
| Driver IC | RM69380 (COF) / RM692E6 |
| Contrast Ratio | 100000:1 |
| Display color | 16.7M (RGB x 8bits) |
| Pixel arrangement | Real RGB arrangement |
| CN1 Pins Description | ||
|---|---|---|
| Pin No. | Symbol | Description |
| 1 | NC | No connect |
| 2 | NC | No connect |
| 3 | GND | Ground |
| 4 | TP_Report_EN | Reserve pin ,lf not used, please open this pin. |
| 5 | TP_RST | Reset pin for touch, active low |
| 6 | TP_INT Sensorhub | Reserve pin ,lf not used, please open this pin. |
| 7 | TP_INT for AP | Interrupt pin for Touch |
| 8 | TP SPI_CS0 | SPI Chip select pin for TP |
| 9 | TP_SPI_SCK | SPI Clock pin for TP |
| 10 | TP_SPI_MOSI | SPI MOSI pin forTP spi |
| 11 | TP_SPI_MISO | SPI MISO pin forTP spi |
| 12 | GND | Ground |
| 13 | TSP_SDA | Reserve pin |
| 14 | TSP_SCL | Reserve pin |
| 15 | TPIC_CLK | Reserve pin |
| 16 | TSP_1.8V | Reserve pin |
| 17 | TSP_3.3V | TP AVDD power |
| 18 | GND | Ground |
| 19 | DSI1_D3_N | DSI-D3- of Slaver IC MIPI |
| 20 | DSI1_D3_P | DSI-D3+ of Slaver IC MIPI |
| 21 | GND | Ground |
| 22 | DSI1_D2_N | DSI-D2- of Slaver IC MIPI |
| 23 | DSI1_D2_P | DSI-D2+ of Slaver IC MIPI |
| 24 | GND | Ground |
| 25 | DSI1_CLK_N | DSI-CLK- of Slaver IC MIPI |
| 26 | DSI1_CLK_P | DSI-CLK+ of Slaver IC MIPI |
| 27 | GND | Ground |
| 28 | DSI1_D1_N | DSI-D1-of Slaver IC MIPI |
| 29 | DSI1_D1_P | DSI-D1+ of Slaver IC MIPI |
| 30 | GND | Ground |
| 31 | DSI1_D0_N | DSI-D0- of Slaver IC MIPI |
| 32 | DSI1_D0_P | DSI-D0+ of Slaver IC MIPI |
| 33 | GND | Ground |
| 34 | ERR_FG | Output pin used to monitor display driver state and error status MIPI'S HSDT |
| 35 | EL_I2C_SCL | (I2C) SCL clock I/O pin for PMIC |
| 36 | EL_I2C_SDA | (l2C) SCL data 1/O pin for PMIC |
| 37 | 1.8V | VDDI for DDIC |
| 38 | 1.8V | VDDI for DDIC |
| 39 | 1.8V | VDDI for DDIC |
| 40 | DP_ID0 | Output pinof DP_ID0,conncet 1.8V |
| 41 | DP_ID1 | Output pinof DP_ID1,conncet GND |
| 42 | NC | No connect |
| 43 | E_AVDD | Power supply for DDIC Analog system |
| 44 | NC | No connect |
| 45 | GND | Ground |
| 46 | (AVDD,Vint)_EN | Power IC enable control pin, |
| 47 | EN_OLED/Swire | Swire protocol setting pin of power lC |
| 48 | NC | No connect |
| 49 | NC | No connect |
| 50 | ELVSS | ELVSS for OLED |
| 51 | ELVSS | ELVSS for OLED |
| CN2 Pins Description | ||
|---|---|---|
| Pin No. | Symbol | Description |
| 1 | ELVSS | ELVSS for OLED |
| 2 | ELVSS | ELVSS for OLED |
| 3 | ELVSS | ELVSS for OLED |
| 4 | ELVSS | ELVSS for OLED |
| 5 | ELVSS | ELVSS for OLED |
| 6 | NC | No connect |
| 7 | ELVDD | ELVDD for OLED |
| 8 | ELVDD | ELVDD for OLED |
| 9 | ELVDD | ELVDD for OLED |
| 10 | ELVDD | ELVDD for OLED |
| 11 | ELVDD | ELVDD for OLED |
| 12 | ELVDD | ELVDD for OLED |
| 13 | ELVDD | ELVDD for OLED |
| 14 | NC | No connect |
| 15 | VDD 3.3V | Power supply for DDIC Analog circuit |
| 16 | VDD 3.3V | Power supply for DDIC Analog circuit |
| 17 | VDD_3.3V | Power supply for DDIC Analog circuit |
| 18 | VDD_3.3V | Power supply for DDIC Analog circuit |
| 19 | NC | No connect |
| 20 | GND | Ground |
| 21 | GND | Ground |
| 22 | GND | Ground |
| 23 | Bist_Enable | Reserve pin , lf not used, please open this pin. |
| 24 | NC | No connect |
| 25 | NC | No connect |
| 26 | NC | No connect |
| 27 | MTP_PWR_L | MTP programming power supply pin (6V typical)Must be left open or connected to DVSS in normal condition. |
| 28 | NC | No connect |
| 29 | NC | No connect |
| 30 | PCD_L | Pins for PCD function |
| 31 | NC | No connect |
| 32 | NC | No connect |
| 33 | RESX | Reset pin for DDIC, active low |
| 34 | NC | No connect |
| 35 | TE_L | Tearing effect output pinto synchronize MCU to frame writing. |
| 36 | GND | Ground |
| 37 | DSI0_D3_N | DSI-D3- of Master IC MIPI |
| 38 | DSI0_D3_P | DSI-D3+ of Master IC MIPI |
| 39 | GND | Ground |
| 40 | DSI0_D2_N | DSI-D2- of Master IC MIPI |
| 41 | DSI0_D2_P | DSI-D2+ of Master IC MIPI |
| 42 | GND | Ground |
| 43 | DSI0_CLK_N | DSI-CLK-of Master IC MIPI |
| 44 | DSI0_CLK_P | DSI-CLK+ of Master IC MIPI |
| 45 | GND | Ground |
| 46 | DSI0_D1_N | DSI-D1- of Master IC MIPI |
| 47 | DSI0_D1_P | DSI-D1+ of Master IC MIPI |
| 48 | GND | Ground |
| 49 | DSI0_D0_N | DSI-D0- of Master IC MIPI |
| 50 | DSI0_D0_P | DSI-D0+ of Master IC MIPI |
| 51 | GND | Ground |
| TP Pins Description | ||
|---|---|---|
| Pin No. | Symbol | Description |
| 1 | GND | Ground |
| 2 | TP_HSYNC | Synchronous signal Hsync(TYP1.8V),It is used to Improve Huawei's active pen experience,connect to Tcon's Pin TCON needs to output Hsync signal to TP IC at the right time. |
| 3 | AVDD | Analog Power Supply(TYP.3.3V) |
| 4 | TP_VSYNC | Reserve pin |
| 5 | AVDD | Analog Power Supply(TYP.3.3V) |
| 6 | TP_RST | TP reset(1.8V) |
| 7 | TP_Report_EN | Reserve pin |
| 8 | TP_INT for AP | TP_INT for AP(1.8V) |
| 9 | TP_INT_Sensor hub | Reserve pin |
| 10 | GND | Ground |
| 11 | TP_SPI_CS0 | TP Slave select for SPI(Serial Peripheral Interface)(1.8V) |
| 12 | TP_SPI_SCK | TP Slave clock forSPI(Serial Peripheral Interface) |
| 13 | TP_SPI_MOSI | TP Master output, slave input forSPI(Serial Peripheral Interface)(1.8V) |
| 14 | TP_SPI_MISO | TP Master input, slave output forSPI(Serial Peripheral Interface)(1.8V) |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | TSP_1.8V | Reserve pin |
| 18 | TSP_1.8V | Reserve pin |
| 19 | TSP_1.8V | Reserve pin |
