The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
AMS258DN01 is 2.58 inch oled display screen with All viewing angle screen. It is RGB interface and resolution is 240*320.Outline dimension is 44.48×62.35 mm, thickness is 1.7 mm. Active area is 39.6×52.48 mm. This oled display is coming out with 24 pins definition. Operating Temperature is -30~70℃, Storage Temperature is -40~80℃.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | AMS258DN01 |
Outline Dimension(mm) | 44.48x62.35x1.7 |
Active Area(mm) | 39.6x52.48 |
Number of Pixel(pixels) | 240xRGBx320 |
Operating temperature(°C) | -30 ~ +70℃ |
Storage temperature(°C) | -40 ~ +80℃ |
Display color | Full Color (16.7M color) |
Display mode | Active Matrix |
Interface | MPU I80-system 8-bit(RGB888) |
Pixel Pitch(mm) | 0.056x0.168 |
Pins Description | |||
---|---|---|---|
PIN | Symbol | I/O | Description |
1 | RESETB | I | This signal will reset the device and must be applied to properly initialize the chip.Active low. |
2 | CS | I | A chip select signal. |
3 | DB6 | I/O | BI-directional data bus. |
4 | DB4 | I/O | BI-directional data bus. |
5 | DB2 | I/O | BI-directional data bus. |
6 | GND | I | Ground |
7 | DB0 | I/O | BI-directional data bus. |
8 | RDX | I | This serves as a read strobe signal. |
9 | GND | I | Ground |
10 | ELVSS | I | Nagative voltage for AMOLED(Type Value=-5.0V) |
11 | EL-ON | O | Power IC enable pin |
12 | VDDI | I | Power supply for digital circuit(Type Value= 1.8V) |
13 | ELVDD | I | Positive voltage for AMOLED(Type Value= +4.5V) |
14 | VPNL | I | Power supply for analog circuit (Type Value=3.7V) |
15 | NC | - | - |
16 | GND | I | Ground |
17 | WRX | I | This serves as a write strobe signal. |
18 | DCX | I | A Command or Data select signal. |
19 | DB3 | I/O | BI-directional data bus. |
20 | DB1 | I/O | BI-directional data bus. |
21 | GND | I | Ground |
22 | DB5 | I/O | BI-directional data bus. |
23 | DB7 | I/O | BI-directional data bus. |
24 | TE | O | Tearing effect output pin to synchronize MCU to frame writing. |