The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
A026IBN01.1 is 2.6 inch transflective lcd display module with 8080 MCU 8-bit Parallel interface . Customization is available. The shape is a rectangle with resolution 160*240. Outline dimension is 40.4 × 62.5mm, thickness is 1.484mm. Active area is 36.48×54.72 mm. This lcd display is coming out with 22 pins definition. Working temperature is -20 to +70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | A026IBN01.1 |
| Size | 2.6 inch |
| LCM Outline Dimension(mm) | 40.4(H) × 62.5(V) ×1.484 (T) |
| Active Area(mm) | 36.48(H)×54.72(V) |
| Number of Pixel(pixels) | 160RGB(H)×240(V) |
| Touch panel | Without |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Driver IC | Novatek NT39116 |
| Brightness | 150nits |
| Color Configuration | R. G. B. Stripe |
| Display mode | Normally White |
| Surface Treatment | Low Reflectance |
| Interface | 8080 MCU 8-bit Parallel |
| Gray Inversion Direction | 1:00 o’clock |
| Pins Description | ||
|---|---|---|
| PIN NO. | Symbol | Description |
| 1 | LED_K | Power for LED backlight cathode |
| 2 | LED_A | Power for LED backlight anode |
| 3 | GND | Ground Pin. |
| 4 | GND | Ground Pin. |
| 5 | RESX | Reset Pin (active low). |
| 6 | GND | Ground Pin. |
| 7 | D7 | 8-Bit Data Bus. |
| 8 | D6 | 8-Bit Data Bus. |
| 9 | D5 | 8-Bit Data Bus. |
| 10 | D4 | 8-Bit Data Bus. |
| 11 | D3 | 8-Bit Data Bus. |
| 12 | D2 | 8-Bit Data Bus. |
| 13 | D1 | 8-Bit Data Bus. |
| 14 | D0 | 8-Bit Data Bus. |
| 15 | RDX | Read Enable Pin. |
| 16 | WRX | Write Enable Pin. |
| 17 | D/CX | Display and Command Selection Pin. D/CX=’1’: Display Data or Parameter. D/CX=’0’: Command. |
| 18 | CSX | Chip Select Pin (Low enable). |
| 19 | TE | Tearing Effect Output Pin. This pin is used to Synchronize MCU to framewriting, activated by S/W command. When this pin is not activated, this pin is low. If not used, please open this pin. |
| 20 | VDD | Power Supply for I/O. |
| 21 | VCI | Power Supply for Analog. |
| 22 | GND | Ground Pin. |
