GSLCD-26240240-IPS is 2.6 inch tft lcd display module with MCU-16bit/SPI interface and IPS all viewing angle screen. Customization is available. The shape is a square with resolution 240*240. Outline dimension is 47.70 x 51.35 mm, thickness is 3.33mm. Active area is 43.20× 43.20 mm. This lcd display is coming out with 40 pins definition. LCD driver IC is ST7789V. Working temperature is -20 to +70℃, storage temperature is -30 to +80℃.Touch/Non-touch is optional.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | GSLCD-26240240-IPS |
| Size | 2.6 inch |
| LCM Outline Dimension(mm) | 47.70 x 51.35 x 2.20 |
| Active Area(mm) | 43.20× 43.20 |
| Number of Pixel(pixels) | 240(RGB) ×240 |
| Touch panel | Optional |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ 80℃ |
| Driver IC | ST7789V |
| Brightness | 300nits |
| Pixel Arrangement | RGB Vertical Stripe |
| Display mode | Nomally Black |
| LCD Type | TFT / Transmissive |
| Interface | MCU-16bit/SPI |
| Viewing Direction | ALL |
| Pins Description | ||
|---|---|---|
| PIN NO. | Symbol | Description |
| 1 | GND | Ground |
| 2 | GND(SDI) | Ground/SPI Serial intput signal |
| 3 | IMO | MCU-16bit /SPI selection pin |
| 4 | FMARK | Tearing effect output signal |
| 5 | NC/YD/ | The touch panel Y bottom pin |
| 6 | NC/XL | The touch panel X left pin |
| 7 | RESET | Reset input signal |
| 8 | RS(SCL) | Data/Command selection pin/SIP Serial interface clock |
| 9 | CS | Chip select input pin |
| 10 | RD | Read signal |
| 11 | WR(D/C) | Write signal/SPI Serves as command or parameter select |
| 12 | VCC | Power supply |
| 13 | NC(SDO) | No Connect/SPI Serial output signal |
| 14 | GND | Ground |
| 15 | DB15 | Databus DB15 |
| 16 | DB14 | Databus DB14 |
| 17 | DB13 | Databus DB13 |
| 18 | DB12 | Databus DB12 |
| 19 | DB11 | Databus DB11 |
| 20 | DB10 | Databus DB10 |
| 21 | DB9 | Databus DB9 |
| 22 | DB8 | Databus DB8 |
| 23 | DB7 | Databus DB7 |
| 24 | DB6 | Databus DB6 |
| 25 | DB0 | Databus DBO |
| 26 | DB1 | Databus DB1 |
| 27 | DB2 | Databus DB2 |
| 28 | DB3 | Databus DB3 |
| 29 | DB4 | Databus DB4 |
| 30 | DB5 | Databus DB5 |
| 31 | NC/YU/ | The touch panel Y up pin |
| 32 | NC/XR/ | The touch panel X right pin |
| 33 | LEDA | Anode of LED Backlight |
| 34 | LEDK1 | Cathode1 of LED Backlight |
| 35 | LEDK2 | Cathode2 of LED Backlight |
| 36 | LEDK3 | Cathode3 of LED Backlight |
| 37 | LEDK4 | Cathode4 of LED Backlight |
| 38 | NC | No Connect |
| 39 | NC | No Connect |
| 40 | GND | Ground |
