The FPC/Interface/luminance/Touch panel/Cover glass of our most products is customizable.
If you have any requirements, please contact us.
W700XGC009-A-CT is a color active matrix LCD module incorporating amorphous silicon TFT(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, FPC, CTP and a
backlight unit. The 7.0′′ display area contains 1024 (RGB) x 600 pixels and can display up to 262K colors.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W700XGC009-A-CT |
| Display Mode | Normally black.Transmissive |
| Display Technology | a-Si TFT active matrix |
| Outline Dimension | 174.44(H) X 111.24(V) X 5.4(T) |
| LCD Active Area | 154.21 (H)X 85.92 (V) |
| Resolution | 1024X(RGB)X600 |
| Pixel Pitch | 0.1506(H)x0.1432 (V) |
| Pixel Configuration | RGB Stripe |
| Backlight | White LED |
| Luminance | 400 |
| LCD Driver IC | HX8282+HX8696 |
| CTP Driver IC | FT5426 |
| Viewing Direction | ALL o'clock |
| Module lifetime(Hours) | 50000 |
| Interface NO. | Symbol | Desaiptio n |
|---|---|---|
| 1 | LEDK | Backliqht cathode. |
| 2 | LEDA | Backlight anode. |
| 3 | GND | Power ground. |
| 4 | VCC | Power supply for digital circuit |
| 5-12 | R0-R7 | Red signal data bus. |
| 13-20 | G0-G7 | Green signal data bus. |
| 21-28 | B0-B7 | Blue signal data bus. |
| 29 | GND | Power grou nd. |
| 30 | DCLK | Dot dock siqnal. |
| 31 | NC | No connect |
| 32 | HSYNC | Horizontal sync input. |
| 33 | VSYNC | Vertical sync input. |
| 34 | DE | Data enable signal. |
| 35 | NC | No connect |
| 36 | GND | Power ground. |
| 37 | RESET | Global reset. Keep VDD during operation. Normally pull high. |
| 38 | SPi SDi | Input for data of serial Interface. Normally pull low. |
| 39 | SPI CS | Input the chip select signal for serial interface. Normally pull low. |
| 40 | SPI SCLK | Input refere nee clock for serial in terface. |
| 10.2 CTP PIN DESCRIPTION | ||
| Interlace NO. | Symbol | Description |
| 1 | GND | GROUND |
| 2 | TP-SDA | TP data input and oulptl, 3.3 V |
| 3 | TP-SCL | TP clock input, 3.3V |
| 4 | TP-RST | TP External Reset |
| 5 | TP-1NT | Inierrupi request to the host, 3.3V |
| 6 | NC | No connect |
| 7-8 | TP_VDD | Analog power supply, 3.3V |
| 9-10 | GND | GROUND |
