W210WVC001-B is a color active matrix LCD module incorporating amorphous silicon TFT(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, FPC, and a backlight unit. The 2.1′′ display area contains 480 (RGB) x480 pixels and can display up to 262K colors.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | W210WVC001-B |
LCM Outline Dimension(mm) | 56.08(H) X 60.36(V) X 2.26(T) |
Active Area(mm) | Φ=53.28 |
Number of Pixel(pixels) | 480X(RGB)X800 |
Touch panel | without |
Operating temperature(°C) | -20 ~ 70℃ |
Storage temperature(°C) | -30 ~ +80℃ |
Driver IC | ST7701s |
Brightness | 250nits |
Pixel arrangement | RGB stripe |
Display mode | Normally black,Transmissive |
Interface | MIPI |
Viewing Direction | ALL o'clock |
Backlight | White LED |
Module lifetime(Hours) | 50000 |
Interface NO. | Symbol | I/O or connect to | Description | When not in use |
---|---|---|---|---|
1-2 | LEDA | LED DRIVER | Backlight anode. | - |
3-4 | LEDK | LED DRIVER | This pin is used to be serial interface clock. | - |
5 | NC | - | No connect. | - |
6-7 | VCC | PWR SUPPLY | Analog power supply, 2.5V~3.3V. | - |
8 | IOVCC | PWR SUPPLY | Interface power supply,1.65v~3.3V. | - |
9 | TE | I/O | Tearing effect signal. | - |
10 | RESET | I/O | Reset pin. | - |
11 | GND | PWR SUPPLY | Power ground. | - |
12 | D1P | I/O | Positive polarity of low voltage differential data signal. | - |
13 | D1N | I/O | Negaitive polarity of low voltage differential data signal. | GND/IOVCC |
14 | GND | PWR SUPPLY | Power ground. | GND/IOVCC |
15 | CLKP | I/O | Positive polarity of low voltage differential clock signal. | GND/IOVCC |
16 | CLKN | I/O | Negaitive polarity of low voltage differential clock signal. | GND/IOVCC |
17 | GND | PWR SUPPLY | Power ground. | GND/IOVCC |
18 | D0P | I/O | Positive polarity of low voltage differential data signal. | - |
19 | D0N | I/O | Negaitive polarity of low voltage differential data signal. | GND/IOVCC |
20-21 | GND | PWR SUPPLY | Power ground. | GND/IOVCC |