Ink Cubic-M023F is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The display is capable to display images at 1-bit black, white and red full display capabilities. The 10.2″ active area contains 960×640 pixels. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, SRAM, LUT, VCOM and border are supplied with each panel.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | MF-1A202-M023F |
| Place of Origin | Guangdong, China |
| Brand Name | Chance |
| Product Name | E Ink Display |
| Outline Dimension | 224.00(H)x157.00(V)x0.92(D) |
| Active Area | 215.52(H)x143.68(V) |
| Pixel Pitch | 0.2245x0.2245 |
| Resolution | 960*640 |
| Interface | 3-wire SPI/4-wire SPI |
| LCD Driver IC | SSD1677 |
| Display Color | Black White Red (Optional) |
| Operating Temperature | 0~40°C |
| Storage Temperature | -25~40°C |
| Module lifetime(Hours) | 50000 |
| Pin# | Single | Desc ription | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connect with other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input tor the Control Loop | |
| 4 | NC | No connection and do not connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | TSCL | Must NC or pull low | |
| 7 | TSDA | Must NC or pull low | |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busy stale output pin | Note 6-4 |
| 10 | RES# | Reset signal inpul. | Note 6-3 |
| 11 | D/C# | Data/Command control pin | Note 6-2 |
| 12 | CS# | The chip select input connecting to the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pin for interlace. | |
| 14 | SDA | Serial data pm lor interface. | |
| 15 | VDDIO | Power inpul pin lor the Interlace. | |
| 16 | VCI | Power Supply pin tor the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin for Negauvc Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
