W177QQC003-A is 1.77 inch tn 12 o’clock viewing angle tft lcd display screen with SPI interface.Customization is available.The shape is a square with resolution 128*160. Outline dimension is 34×43.7mm, thickness is 2.30mm. Active area is 28.03×35.04mm.This lcd display is coming out with 11 pins defination. LCD driver IC is ST7735S, operating voltage is 2.5V~3.3V. Working temperature is -20 to 70℃, storage temperature is -30 to +80℃.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | W177QQC003-A |
LCM Outline Dimension(mm) | 34.00(H) X 43.70(V) X 2.30(T) |
Active Area(mm) | 28.03 (H) X 35.04 (V) |
Number of Pixel(pixels) | 128X(RGB)X160 |
Touch panel | without |
Operating temperature(°C) | -20 ~ +70℃ |
Storage temperature(°C) | -30 ~ +80℃ |
Driver IC | ST7735S |
Brightness | 150nits |
Surface Treatment | Anti-Glare |
Pixel arrangement | RGB stripe |
Display mode | Normally White,Transmissive |
Interface | SPI |
Viewing Direction | 12 o'clock |
Backlight | White LED |
Module lifetime(Hours) | 50000 |
Pins Description | ||||
---|---|---|---|---|
PIN NO. | Symbol | I/O or connect to | Description | When not in use |
1 | LEDK | I/O | Backlight cathode. | - |
2 | LEDA | PWR SUPPLY | Backlight anode. | - |
3 | NC | LED DRIVER | No connect. | - |
4 | NC | LED DRIVER | No connect. | - |
5 | GND | PWR SUPPLY | Power ground. | - |
6 | VDD | PWR SUPPLY | Analog power supply, 2.5V~3.3V. | - |
7 | SDA | I/O | The data input/ output signal in serial. | IOVCC/GND |
8 | SCL | I/O | The clock signal in serial. | IOVCC/GND |
9 | RS | I/O | The data/ command selection in serial. | IOVCC/GND |
10 | RESET | I/O | Reset pin. | - |
11 | CS | I/O | Chip Select pin. | IOVCC/GND |