AMS258DN01 is 2.58 inch oled display screen with All viewing angle screen. It is RGB interface and resolution is 240*320.Outline dimension is 44.48×62.35 mm, thickness is 1.7 mm. Active area is 39.6×52.48 mm. This oled display is coming out with 24 pins definition. Operating Temperature is -30~70℃, Storage Temperature is -40~80℃.
DRAWING
SPECIFICATIONS
General Specification | |
---|---|
Part No. | AMS258DN01 |
Outline Dimension(mm) | 44.48x62.35x1.7 |
Active Area(mm) | 39.6x52.48 |
Number of Pixel(pixels) | 240xRGBx320 |
Operating temperature(°C) | -30 ~ +70℃ |
Storage temperature(°C) | -40 ~ +80℃ |
Display color | Full Color (16.7M color) |
Display mode | Active Matrix |
Interface | MPU I80-system 8-bit(RGB888) |
Pixel Pitch(mm) | 0.056x0.168 |
Pins Description | |||
---|---|---|---|
PIN | Symbol | I/O | Description |
1 | RESETB | I | This signal will reset the device and must be applied to properly initialize the chip.Active low. |
2 | CS | I | A chip select signal. |
3 | DB6 | I/O | BI-directional data bus. |
4 | DB4 | I/O | BI-directional data bus. |
5 | DB2 | I/O | BI-directional data bus. |
6 | GND | I | Ground |
7 | DB0 | I/O | BI-directional data bus. |
8 | RDX | I | This serves as a read strobe signal. |
9 | GND | I | Ground |
10 | ELVSS | I | Nagative voltage for AMOLED(Type Value=-5.0V) |
11 | EL-ON | O | Power IC enable pin |
12 | VDDI | I | Power supply for digital circuit(Type Value= 1.8V) |
13 | ELVDD | I | Positive voltage for AMOLED(Type Value= +4.5V) |
14 | VPNL | I | Power supply for analog circuit (Type Value=3.7V) |
15 | NC | - | - |
16 | GND | I | Ground |
17 | WRX | I | This serves as a write strobe signal. |
18 | DCX | I | A Command or Data select signal. |
19 | DB3 | I/O | BI-directional data bus. |
20 | DB1 | I/O | BI-directional data bus. |
21 | GND | I | Ground |
22 | DB5 | I/O | BI-directional data bus. |
23 | DB7 | I/O | BI-directional data bus. |
24 | TE | O | Tearing effect output pin to synchronize MCU to frame writing. |