Ink Cubic-M028F-J is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 2.90”active area contains 128×296 pixels and has 1-bit B/W full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC, SRAM, LUT, VCOM and border are supplied with each panel.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | MF-12901-M028F-J |
| Type | EPD |
| Module Size | 2.9 Inch |
| Dimensional outline | 36.70(H)x79.00 (V) xO.95(D) |
| Active area | 29.06(H)x66.90(V) |
| Resoluti on | 128*296 |
| Pixel Pitch | 0.227x0.226 |
| Interface | 3-wire SPI/4-wire SPI |
| Driver IC | SSD1680 |
| Display Color | Black White Red Yellow (Optional) |
| Weight | 5.22g |
| Pixel Configuration | Rectangle |
| Operating Temperature | 0°C ~ 50°C |
| Storage Temperature | -25°C ~ 70°C |
| Supplier Type | Manufacturer |
| Place of Origin | China, Guangdong |
| Pin# | Single | Desc ri ption | Remark |
|---|---|---|---|
| 1 | NC | No connection and do not connecl with other NC pins | Keep Open |
| 2 | GDR | N-Channei MOSFET Gate Drive Control | |
| 7 | RFSF | CirremSerKF Input tnr the Control 1 mp | |
| 4 | NC | No connection and do not connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | NC | No connection and do not connect with other N C pins | Keep Open |
| 7 | NC | No connection and do not connecl with other NC pins | Keep Open |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busy state ouiput pin | Note 6-4 |
| 10 | RES# | Reset signal input. | Note 6-3 |
| 11 | D/C# | Daia/Command control pin | Note 6-2 |
| 12 | CS# | Thechip select input connecting to the MCU. | Note 6-1 |
| 13 | SCL | Serial clock pin for interface. | |
| 14 | SDA | Serial data pin tor interface. | |
| 15 | VDDIO | Power inpul pin tor the Interface. | |
| 16 | VCI | Power Supply pin lor the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply lor OTP Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin lor Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving vohage | |
| 23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage |
