F101WSV05A-TLUL is a 1024*600 dots matrix TFT LCD module. It has a TFT panel composed of 1024 sources and 600gates. The LCM can be easily accessed by micro-controller.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | XF101WSV05A-TLUL |
| LCM Outline Dimension(mm) | 235.0(W)*143.0(H)*5.15±0.1 (FPC not include) |
| Active Area(mm) | 222.72(W)*125.28(H) |
| Number of Pixel(pixels) | 1024RGB*600 |
| Touch panel | without |
| Operating temperature(°C) | -20 ~ 70℃ |
| Storage temperature(°C) | -30 ~ +80℃ |
| Driver IC | HX8282A+HX8696A |
| Brightness | 300 nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally black,Transmissive |
| Interface | LVDS |
| Viewing Direction | 6 o'clock |
| Backlight | White LED |
| Module lifetime(Hours) | 50000 |
| Pin No. | Symbol | Functional |
|---|---|---|
| 1 | NC | No connect |
| 2-3 | VDD | Power supply for digital circuits |
| 4 | NC | No connect |
| 5 | RESET | Reset signal |
| 6-7 | NC | No connect |
| 8 | RXIN0- | Negative polarity of low voltage differential data signal |
| 9 | RXIN0+ | Positive polarity of low voltage differential data signal |
| 10 | GND | Power Ground |
| 11 | RXIN1- | Negative polarity of low voltage differential data signal |
| 12 | RXIN1+ | Positive polarity of low voltage differential data signal |
| 13 | GND | Power Ground |
| 14 | RXIN2- | Negative polarity of low voltage differential data signal |
| 15 | RXIN2+ | Positive polarity of low voltage differential data signal |
| 16 | GND | Power Ground |
| 17 | RXCLKIN- | Negative polarity of low voltage differential clock signal |
| 18 | RXCLKIN+ | Positive polarity of low voltage differential clock signal |
| 19 | GND | Power Ground |
| 20 | RXIN3- | Negative polarity of low voltage differential data signal |
| 21 | RXIN3+ | Positive polarity of low voltage differential data signal |
| 22 | GND | Power Ground |
| 23-24 | NC | No connect |
| 25 | GND | Power Ground |
| 26-27 | NC | No connect |
| 28 | GND | Power Ground |
| 29-30 | NC | No connect |
| 31-33 | GND | Power Ground |
| 34 | NC | No connect |
| 35 | PWM | Backlit dimming controller |
| 36 | LED-ENABLE | Backlit LED enables the |
| 37 | NC | No connect |
| 38-40 | VLED | Backlit LED drive circuit input power supply |
