W700XGC011-A is 7 inch IPS All o’clock viewing angle tft lcd display screen with TTL interface. Customization is available. The shape is a rectangle with resolution 1024*600. Outline dimension is 165 X 100 mm, thickness is 5.7 mm. Active area is 154.21 X 85.92 mm. This lcd display is coming out with 50 pins definition. Driver IC is HX8282+HX8696, Working temperature is -30 to +85℃, storage temperature is -40 to +90℃.
DRAWING
SPECIFICATIONS
| General Specification | |
|---|---|
| Part No. | W700XGC011-A |
| Outline Dimension(mm) | 165(H) X 100(V) X 5.70(T) |
| Active Area(mm) | 154.21 (H) X 85.92 (V) |
| Number of Pixel(pixels) | 1024X(RGB)X600 |
| Touch panel | with or without optional |
| Operating temperature(°C) | -30 ~ +85℃ |
| Storage temperature(°C) | -40 ~ +90℃ |
| Driver IC | HX8282+HX8696 |
| Brightness | 1000nits |
| Pixel arrangement | RGB stripe |
| Display mode | Normally black, Transmissive |
| Interface | TTL |
| Viewing Direction | ALL o'clock |
| Backlight | White LED |
| Module lifetime(Hours) | 50000 |
| Pins Description | ||
|---|---|---|
| Pin No. | Symbol | Functional |
| 1-2 | LEDA | Backlight anode |
| 3-4 | LEDK | Backlight cathode |
| 5 | GND | Power Ground |
| 6 | VCOM | The power supply of common voltage in DC com driving |
| 7 | DVDD | Power supply for digital circuits |
| 8 | MODE | DE/ SYNC mode select under TTL mode |
| 9 | DEN | Data enable input |
| 10 | VSD | Vertical Sync input signal forRGB mode |
| 11 | HSD | Horizontal Sync input signal for RGB mode |
| 12-19 | B7-B0 | Blue data bus |
| 20-27 | G7-G0 | Green data bus |
| 28-35 | R7-R0 | Red data bus |
| 36 | GND | Power Ground |
| 37 | DCLK | Input clock edge selection. Normally pull low |
| 38 | GND | Power Ground |
| 39 | SHLR | Source Right or Left sequence control. Normally pull high |
| 40 | UPDN | Gate Up or Down scan control. Normally pull low |
| 41 | VGH | Positive high voltage from the step-up circuit |
| 42 | VGL | Negative low voltage from the step-up circuit |
| 43 | AVDD | Power supply for analog circuits |
| 44 | RESET | Global reset signal |
| 45 | NC | No connect |
| 46 | VCOM | The power supply of common voltage in DC com driving |
| 47 | DITHER | Dithering function enable control. Normally pull low |
| 48 | GND | Power Ground |
| 49-50 | NC | No connect |
